Additive Manufacturing
Precision Machining
Quality Assurance
Additive Manufacturing / AlSi10MgMost used
AlSi10Mg aluminium 3D printing
Light, thermally conductive and quick to machine. AlSi10Mg is the alloy we print most often.
About AlSi10Mg
AlSi10Mg is an aluminium alloy with about 10% silicon and a small addition of magnesium. It comes from the casting world (EN AC-43000), and that is exactly why it prints so well: it flows, solidifies and fuses predictably in the laser melt pool.
Because every layer cools very fast, a printed AlSi10Mg part has a much finer microstructure than a casting of the same alloy. You get a light part with good strength and good thermal conductivity, in a shape no mould could produce: internal channels, thin ribs and organic forms.
Typical applications
- Lightweight brackets and housings
- Air-intake parts, ducts and pipes
- Manifolds with internal channels
- Cooling plates and heat exchangers
- Functional prototypes for automotive and motorsport
- Fixtures and assembly aids
Why engineers choose AlSi10Mg
Low weight
Aluminium for brackets, housings and moving parts where mass matters.
Moves heat
Good thermal conductivity for cooling plates, heat exchangers and electronics housings.
Machines easily
Sealing faces, bores and threads are CNC-finished in-house after printing.
Takes coatings
Powder coating in-house; anodizing and Cerakote through qualified partners.
Standards and designations
| Alloy | AlSi10Mg |
|---|---|
| EN designation | EN AC-43000 (EN 1706) |
| Material number | 3.2381 |
Technical specifications
| Process | Laser powder bed fusion (LPBF / SLM) |
|---|---|
| Machine | DMG MORI LASERTEC 30 SLM 2nd Generation |
| Build envelope | 300 × 300 × 300 mm per build |
| Larger parts | Printed in sections, joined and machined as one component |
| Delivered condition | Stress relieved in our own furnace |
| Inspection | Critical dimensions on a Mitutoyo CMM |
From print to finished AlSi10Mg part
AlSi10Mg is stress relieved while the parts are still on the build plate. This relaxes the residual stress from printing before the parts are cut off, so they keep their shape during machining.
01. Print
LPBF / SLM on the DMG MORI LASERTEC 30 SLM.
02. Stress relieve
In our own furnace, while the parts are still on the build plate.
03. Cut off
Parts removed from the build plate by wire EDM or band saw.
04. Remove supports
Support structures removed and surfaces prepared.
05. Machine
5-axis CNC machining of functional surfaces on DMG MORI machines.
06. Finish
Surface finishing to your drawing.
07. Inspect
Critical dimensions measured on our Mitutoyo CMM.
08. Deliver
With the documentation you need, up to PPAP Level 2.
Finishing options
In-house in Kortenberg
- CNC milling and turning
- Wire EDM
- Polishing
- Powder coating
- Laser marking
Through qualified partners
- Anodizing
- Cerakote
- KTL
More on metal SLM, 5-axis machining, CMM inspection and metal 3D printing in Belgium.
Mechanical properties: measured, not borrowed
The properties of a printed part depend on the machine, the parameters, the powder batch, the build orientation and the heat treatment. A datasheet measured on another machine says little about your part.
That is why we are building our own AlSi10Mg datasheet from test bars printed on our LASERTEC 30 SLM and stress relieved in our own furnace. Until it is published, ask us for property information with your quotation. For critical parts we can print test bars in the same build as your parts and have them tested by an external lab.
AlSi10Mg 3D printing: FAQ
Is printed AlSi10Mg the same as cast aluminium?
It is the same alloy family as cast EN AC-43000, but the printed microstructure is much finer, so the properties are not the same as a casting. We document the properties per order instead of quoting casting data.
Which heat treatment do you apply to AlSi10Mg?
We deliver AlSi10Mg in the stress-relieved condition, done in our own furnace before the parts come off the build plate. If your drawing calls for another condition, tell us when you request a quotation.
How fast can you deliver an AlSi10Mg part?
A typical AlSi10Mg part, printed, stress relieved and CNC-finished in-house, ships in about two weeks.
Can AlSi10Mg parts be anodized?
Yes. We arrange anodizing through a qualified partner, under our own quality system, so you still have one contact and one delivery.
Need a part in AlSi10Mg?
Send a STEP file and a 2D drawing to operations@bindsol.eu. Every enquiry is answered on the same working day.