Additive Manufacturing
Precision Machining
Quality Assurance
Additive Manufacturing / 316LMost used
316L stainless steel 3D printing
Corrosion-resistant, tough and easy to finish. Our go-to steel for functional parts.
About 316L
316L (1.4404) is a low-carbon austenitic stainless steel alloyed with molybdenum. The molybdenum gives it better corrosion resistance than standard 304 stainless, and the low carbon content keeps it corrosion-resistant after welding.
Printed 316L is dense and ductile. It can be machined, welded and polished like bar-stock 316L, which makes it a safe choice for functional prototypes that have to behave like the series part.
Typical applications
- Functional prototypes for commercial vehicles
- Pipes, fittings and fluid manifolds
- Brackets and housings for harsh environments
- Motorsport pipes and intake parts
- Parts that must match a wrought 316L series part
Why engineers choose 316L
Corrosion resistance
Molybdenum-alloyed stainless for wet, outdoor and chemically demanding environments.
Ductile and tough
Deforms before it breaks, which makes it forgiving in functional testing.
Polishes to a mirror
Mirror polishing is done in-house for visible and hygienic surfaces.
Weldable
Larger parts can be printed in sections and joined into one component.
Standards and designations
| Alloy | 316L |
|---|---|
| EN designation | X2CrNiMo17-12-2 |
| Material number | 1.4404 |
| UNS | S31603 |
Technical specifications
| Process | Laser powder bed fusion (LPBF / SLM) |
|---|---|
| Machine | DMG MORI LASERTEC 30 SLM 2nd Generation |
| Build envelope | 300 × 300 × 300 mm per build |
| Larger parts | Printed in sections, joined and machined as one component |
| Delivered condition | Stress relieved in our own furnace |
| Inspection | Critical dimensions on a Mitutoyo CMM |
From print to finished 316L part
316L is stress relieved on the build plate, then cut off by wire EDM or band saw. Supports are removed, and functional faces are machined and checked on the CMM.
01. Print
LPBF / SLM on the DMG MORI LASERTEC 30 SLM.
02. Stress relieve
In our own furnace, while the parts are still on the build plate.
03. Cut off
Parts removed from the build plate by wire EDM or band saw.
04. Remove supports
Support structures removed and surfaces prepared.
05. Machine
5-axis CNC machining of functional surfaces on DMG MORI machines.
06. Finish
Surface finishing to your drawing.
07. Inspect
Critical dimensions measured on our Mitutoyo CMM.
08. Deliver
With the documentation you need, up to PPAP Level 2.
Finishing options
In-house in Kortenberg
Through qualified partners
- Coatings on request
More on metal SLM, 5-axis machining, CMM inspection and metal 3D printing in Belgium.
Mechanical properties: measured, not borrowed
The properties of a printed part depend on the machine, the parameters, the powder batch, the build orientation and the heat treatment. A datasheet measured on another machine says little about your part.
That is why we are building our own 316L datasheet from test bars printed on our LASERTEC 30 SLM and stress relieved in our own furnace. Until it is published, ask us for property information with your quotation. For critical parts we can print test bars in the same build as your parts and have them tested by an external lab.
316L 3D printing: FAQ
How fast can you deliver 316L prototypes?
For Scania we printed, machined and CMM-inspected five functional 316L prototypes in 8 working days. Lead time depends on size and finishing, and we confirm it in the quotation.
Can printed 316L be welded?
Yes. 316L is a low-carbon stainless steel and welds well. We use this to build parts that are larger than our 300 × 300 × 300 mm build envelope.
Can you polish 316L to a mirror finish?
Yes. Polishing and mirror polishing are done in-house in Kortenberg.
When should I choose 316L over 17-4 PH?
Choose 316L when corrosion resistance and toughness matter most. Choose 17-4 PH when the part needs higher strength or hardness and a hardenable stainless steel.
Need a part in 316L?
Send a STEP file and a 2D drawing to operations@bindsol.eu. Every enquiry is answered on the same working day.