Additive Manufacturing
Precision Machining
Quality Assurance
Additive Manufacturing / 17-4 PH
17-4 PH stainless steel 3D printing
A stainless steel that can be hardened, for parts that need strength and wear resistance.
About 17-4 PH
17-4 PH (1.4542) is a precipitation-hardening stainless steel with chromium, nickel and copper. Compared to 316L it trades some corrosion resistance and ductility for clearly higher strength and hardness.
That makes it a good fit for mechanical parts, tooling and fixtures that see load and wear but still need to stay stainless.
Typical applications
- Tooling, fixtures and gauges
- Mechanical components under load
- Valve and pump parts
- Defence components that need strength and corrosion resistance
Why engineers choose 17-4 PH
Higher strength
Much stronger and harder than 316L after hardening.
Still stainless
Good corrosion resistance for a hardenable steel.
Hardenable
Strength and hardness are set by the ageing treatment.
Machines well
Functional faces are finished in-house on our CNC machines.
Standards and designations
| Alloy | 17-4 PH |
|---|---|
| EN designation | X5CrNiCuNb16-4 |
| Material number | 1.4542 |
| UNS | S17400 |
Technical specifications
| Process | Laser powder bed fusion (LPBF / SLM) |
|---|---|
| Machine | DMG MORI LASERTEC 30 SLM 2nd Generation |
| Build envelope | 300 × 300 × 300 mm per build |
| Larger parts | Printed in sections, joined and machined as one component |
| Delivered condition | Stress relieved in our own furnace |
| Inspection | Critical dimensions on a Mitutoyo CMM |
From print to finished 17-4 PH part
17-4 PH reaches its specified strength after ageing. We deliver it stress relieved as standard. If your drawing calls for a hardened condition, tell us when you request a quotation.
01. Print
LPBF / SLM on the DMG MORI LASERTEC 30 SLM.
02. Stress relieve
In our own furnace, while the parts are still on the build plate.
03. Cut off
Parts removed from the build plate by wire EDM or band saw.
04. Remove supports
Support structures removed and surfaces prepared.
05. Machine
5-axis CNC machining of functional surfaces on DMG MORI machines.
06. Finish
Surface finishing to your drawing.
07. Inspect
Critical dimensions measured on our Mitutoyo CMM.
08. Deliver
With the documentation you need, up to PPAP Level 2.
Finishing options
In-house in Kortenberg
Through qualified partners
- Coatings on request
More on metal SLM, 5-axis machining, CMM inspection and metal 3D printing in Belgium.
Mechanical properties: measured, not borrowed
The properties of a printed part depend on the machine, the parameters, the powder batch, the build orientation and the heat treatment. A datasheet measured on another machine says little about your part.
That is why we are building our own 17-4 PH datasheet from test bars printed on our LASERTEC 30 SLM and stress relieved in our own furnace. Until it is published, ask us for property information with your quotation. For critical parts we can print test bars in the same build as your parts and have them tested by an external lab.
17-4 PH 3D printing: FAQ
What is the difference between 17-4 PH and 316L?
17-4 PH is a hardenable stainless steel with much higher strength and hardness. 316L has better corrosion resistance and ductility.
Do you harden 17-4 PH?
We deliver 17-4 PH stress relieved as standard. If your specification calls for an aged condition, tell us when you request a quotation.
Is 17-4 PH the same as 1.4542 or AISI 630?
Yes. 17-4 PH, 1.4542, X5CrNiCuNb16-4 and AISI 630 refer to the same precipitation-hardening stainless steel.
Need a part in 17-4 PH?
Send a STEP file and a 2D drawing to operations@bindsol.eu. Every enquiry is answered on the same working day.