Additive Manufacturing
Precision Machining
Quality Assurance
Additive Manufacturing / Ti6Al4V
Ti6Al4V titanium 3D printing
Steel-like strength at a little over half the weight, for parts where every gram counts.
About Ti6Al4V
Ti6Al4V, also called titanium Grade 5, is the most widely used titanium alloy. It combines high strength with low density and keeps its strength at temperatures where aluminium starts to soften.
Titanium is expensive and slow to machine from solid, and much of the bar ends up as chips. Printing builds only the material the part needs. Critical features are then finished on our 5-axis machines.
Typical applications
- Lightweight structural brackets
- Motorsport and high-performance automotive parts
- Defence components where weight is critical
- Parts close to heat sources
- Corrosion-exposed fittings and housings
Why engineers choose Ti6Al4V
Strength-to-weight
One of the best strength-to-weight ratios of any engineering metal.
Corrosion resistance
A stable oxide layer protects it in salt water and many chemicals.
Heat tolerance
Keeps its strength at higher temperatures than aluminium alloys.
Less waste
Printing near-net shape avoids machining most of an expensive bar into chips.
Standards and designations
| Alloy | Ti6Al4V (Grade 5) |
|---|---|
| EN designation | TiAl6V4 |
| Material number | 3.7165 |
| UNS | R56400 |
Technical specifications
| Process | Laser powder bed fusion (LPBF / SLM) |
|---|---|
| Machine | DMG MORI LASERTEC 30 SLM 2nd Generation |
| Build envelope | 300 × 300 × 300 mm per build |
| Larger parts | Printed in sections, joined and machined as one component |
| Delivered condition | Stress relieved in our own furnace |
| Inspection | Critical dimensions on a Mitutoyo CMM |
From print to finished Ti6Al4V part
Titanium powder is reactive, so it is printed under argon and handled in a closed powder system. Parts are stress relieved before they are cut off the build plate.
01. Print
LPBF / SLM on the DMG MORI LASERTEC 30 SLM.
02. Stress relieve
In our own furnace, while the parts are still on the build plate.
03. Cut off
Parts removed from the build plate by wire EDM or band saw.
04. Remove supports
Support structures removed and surfaces prepared.
05. Machine
5-axis CNC machining of functional surfaces on DMG MORI machines.
06. Finish
Surface finishing to your drawing.
07. Inspect
Critical dimensions measured on our Mitutoyo CMM.
08. Deliver
With the documentation you need, up to PPAP Level 2.
Finishing options
In-house in Kortenberg
Through qualified partners
- Coatings on request
More on metal SLM, 5-axis machining, CMM inspection and metal 3D printing in Belgium.
Mechanical properties: measured, not borrowed
The properties of a printed part depend on the machine, the parameters, the powder batch, the build orientation and the heat treatment. A datasheet measured on another machine says little about your part.
That is why we are building our own Ti6Al4V datasheet from test bars printed on our LASERTEC 30 SLM and stress relieved in our own furnace. Until it is published, ask us for property information with your quotation. For critical parts we can print test bars in the same build as your parts and have them tested by an external lab.
Ti6Al4V 3D printing: FAQ
Why print titanium instead of machining it?
Machining titanium from solid is slow, and most of an expensive bar ends up as chips. Printing builds only the material the part needs, and we machine only the faces that need it.
Which condition are Ti6Al4V parts delivered in?
Stress relieved, in our own furnace. If your specification calls for another condition, tell us when you request a quotation.
Is Ti6Al4V the same as titanium Grade 5?
Yes. Ti6Al4V, Grade 5, TiAl6V4 and 3.7165 all refer to the same titanium alloy with about 6% aluminium and 4% vanadium.
Need a part in Ti6Al4V?
Send a STEP file and a 2D drawing to operations@bindsol.eu. Every enquiry is answered on the same working day.