Additive Manufacturing / 316LMost used

316L stainless steel 3D printing

Corrosion-resistant, tough and easy to finish. Our go-to steel for functional parts.

Request a quote
316L stainless steel part, metal 3D printed by LPBF at BINDSOL in Kortenberg, Belgium
300 × 300 × 300 mm
per build
Stress relieved
in our own furnace
1.4404
X2CrNiMo17-12-2
8 working days
Scania functional prototypes
ISO 9001:2015
certified quality system

About 316L

316L (1.4404) is a low-carbon austenitic stainless steel alloyed with molybdenum. The molybdenum gives it better corrosion resistance than standard 304 stainless, and the low carbon content keeps it corrosion-resistant after welding.

Printed 316L is dense and ductile. It can be machined, welded and polished like bar-stock 316L, which makes it a safe choice for functional prototypes that have to behave like the series part.

Typical applications

  • Functional prototypes for commercial vehicles
  • Pipes, fittings and fluid manifolds
  • Brackets and housings for harsh environments
  • Motorsport pipes and intake parts
  • Parts that must match a wrought 316L series part

Why engineers choose 316L

Corrosion resistance

Molybdenum-alloyed stainless for wet, outdoor and chemically demanding environments.

Ductile and tough

Deforms before it breaks, which makes it forgiving in functional testing.

Polishes to a mirror

Mirror polishing is done in-house for visible and hygienic surfaces.

Weldable

Larger parts can be printed in sections and joined into one component.

Standards and designations

Alloy 316L
EN designation X2CrNiMo17-12-2
Material number 1.4404
UNS S31603

Technical specifications

Process Laser powder bed fusion (LPBF / SLM)
Machine DMG MORI LASERTEC 30 SLM 2nd Generation
Build envelope 300 × 300 × 300 mm per build
Larger parts Printed in sections, joined and machined as one component
Delivered condition Stress relieved in our own furnace
Inspection Critical dimensions on a Mitutoyo CMM

From print to finished 316L part

316L is stress relieved on the build plate, then cut off by wire EDM or band saw. Supports are removed, and functional faces are machined and checked on the CMM.

01. Print
LPBF / SLM on the DMG MORI LASERTEC 30 SLM.

02. Stress relieve
In our own furnace, while the parts are still on the build plate.

03. Cut off
Parts removed from the build plate by wire EDM or band saw.

04. Remove supports
Support structures removed and surfaces prepared.

05. Machine
5-axis CNC machining of functional surfaces on DMG MORI machines.

06. Finish
Surface finishing to your drawing.

07. Inspect
Critical dimensions measured on our Mitutoyo CMM.

08. Deliver
With the documentation you need, up to PPAP Level 2.

Finishing options

In-house in Kortenberg

Through qualified partners

  • Coatings on request

More on metal SLM, 5-axis machining, CMM inspection and metal 3D printing in Belgium.

Mechanical properties: measured, not borrowed

The properties of a printed part depend on the machine, the parameters, the powder batch, the build orientation and the heat treatment. A datasheet measured on another machine says little about your part.

That is why we are building our own 316L datasheet from test bars printed on our LASERTEC 30 SLM and stress relieved in our own furnace. Until it is published, ask us for property information with your quotation. For critical parts we can print test bars in the same build as your parts and have them tested by an external lab.

316L 3D printing: FAQ

How fast can you deliver 316L prototypes?

For Scania we printed, machined and CMM-inspected five functional 316L prototypes in 8 working days. Lead time depends on size and finishing, and we confirm it in the quotation.

Can printed 316L be welded?

Yes. 316L is a low-carbon stainless steel and welds well. We use this to build parts that are larger than our 300 × 300 × 300 mm build envelope.

Can you polish 316L to a mirror finish?

Yes. Polishing and mirror polishing are done in-house in Kortenberg.

When should I choose 316L over 17-4 PH?

Choose 316L when corrosion resistance and toughness matter most. Choose 17-4 PH when the part needs higher strength or hardness and a hardenable stainless steel.

Need a part in 316L?

Send a STEP file and a 2D drawing to operations@bindsol.eu. Every enquiry is answered on the same working day.

Contact us